Samstag, 7. Mai 2011

INE WB Vol1 - 5.8.EIGRP Summarization

!
router eigrp 100
redistribute rip metric 100000 10 255 1 1500

RSRack1R4(config-router)#redistribute rip metric 10 ?
  <0-4294967295>  EIGRP delay metric, in 10 microsecond units

RSRack1R4(config-router)#end

FastEthernet Delay 100ms
https://learningnetwork.cisco.com/thread/6116

Donnerstag, 5. Mai 2011

INE WB Vol1 - 5.1 EIGRP Network Statement

My solution was "passive-interface default" not just adding net network statements with host wildcard mask

Hm...

INE WB Vol1 - 4.22 RIPv2 Source Validation

Review

INE WB Vol1 - 4.16 RIPv2 Default Routing


SW1
router rip
distribute-list prefix DEF in
!
ip prefix-list DEF seq 5 deny 0.0.0.0/0
ip prefix-list DEF seq 10 permit 0.0.0.0/0 le 32
!
 
!
router rip
default-information originate route-map INT
!
route-map INT permit 10
set interface FastEthernet0/0.146
!
!

INE WB Vol1 - 4.12 RIPv2 Filtering with Extended Access-Lists


access-list 188 permit ip 155.1.9.0 0.0.0.255 host 155.1.0.1
access-list 188 deny   ip 155.1.9.0 0.0.0.255 any
access-list 188 permit ip 155.1.7.0 0.0.0.255 host 155.1.0.1
access-list 188 deny   ip 155.1.7.0 0.0.0.255 any
access-list 188 permit ip 155.1.1.0 0.0.0.255 host 155.1.0.3
access-list 188 deny   ip 155.1.1.0 0.0.0.255 any

INE WB Vol1 - 4.11 RIPv2 Filtering with Standard Access-Lists


Rack1R6#sh ip access-lists EVEN 
Standard IP access list EVEN
    10 permit 0.0.1.0, wildcard bits 255.255.254.255 (14 matches)
Rack1R6#sh run | incl distribute
distribute-list EVEN in Serial0/0/0
Rack1R6#

INE WB Vol1 - 4.10 RIPv2 Filtering with Prefix-Lists


RIP does not
generate a route to Null0 when generating summaries.